Welcome to our websites!

TFY-450-1 Multi-functional Cleaner

Short Description:

product description: TFY-450 controls the concentration of coarse slag separately by axial flushing water, which can effectively control fiber loss. The fiber loss is small, and the number and number of slag removers required are correspondingly reduced. The separation efficiency is higher, the running concentration is up to 2%, the isostatic press forms the ceramic cone, and the outer wall is processed by the numerical control lathe, the dimensional precision is high, and the inner surface i...


Product Detail

Product Tags

product description:
TFY-450 controls the concentration of coarse slag separately by axial flushing water, which can effectively control fiber loss. The fiber loss is small, and the number and number of slag removers required are correspondingly reduced. The separation efficiency is higher, the running concentration is up to 2%, the isostatic press forms the ceramic cone, and the outer wall is processed by the numerical control lathe, the dimensional precision is high, and the inner surface is very smooth. The coarse slag has a high content of impurities and a smaller fiber loss. The clogging phenomenon does not occur during the operation by dilution of the coarse slag and continuous slagging in all sections. The main features are reduced fiber loss, improved capacity, and reduced number and number of slag removers. Customers can also use the original slag remover; upgrade the original slagging unit with a new axial flushing water unit, check and optimize your slag remover during the retrofit, and we only make the necessary piping modifications for your system. . The optimization of the bottom axial flushing water causes the cleaner to be less affected by changes in the feedstock.

The main technical parameters
Single feed flow rate: 450L/min
Maximum operating pressure: 4bar
Maximum operating temperature: 70 ° C
Inlet and discharge pressure difference: 1.6 bar
Minimum good pressure: 0.1 bar
Feeding concentration: ≤2%
Flushing water flow: 20~60L/min

ABOUT-TIANLI
WORKSHOP
CUSTOMERS

  • Previous:
  • Next:

  • Write your message here and send it to us